Fence Catalog


THE FENCE
COLLECTION2026 / PRODUCT CATALOG
Great spaces
start here.
26 styles. Seven fence families. The details that make them yours.
Find your fence.
Start with the material. Explore the profile. Make it yours.
Vinyl Fence
Privacy→2 Rail→3 Rail→4 Rail→Privacy with Lattice→Picket→Scalloped Picket→Pool→
Lifestyle imagery includes product photographs and AI-generated visualizations, labeled where shown. Full-panel artwork and calculator finish references are shown separately. Digital previews do not replace physical samples.

A classic.
Made personal.
Vinyl Fence
Solid privacy, decorative lattice, open pickets and clean rail lines. Start with the amount of enclosure you want, then choose the profile and finish.

Your own
kind of quiet.
Privacy
A solid vinyl profile gives patios and gardens a continuous backdrop. The broad top rail and vertical infill create a simple, uninterrupted line.

Make it yours.

































PICKETS 11.3″ or 6″
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Every detail,
considered.
Build the profile around your space.

Routed 5 × 5 posts
Use line, end and corner routing matched to this panel.

Pocket top and bottom rails
1.5 × 5.5-inch profile; 8-inch profile where available. Match the supplied panel.

Tongue-and-groove pickets
11.3-inch or 6-inch profiles where available. Interlock each edge.

Continuous U-channel
Captures the first and last privacy-picket edges at the posts.

Matching post caps
Pyramid, Gothic or New England in the selected vinyl color.

Most popular pocket-rail profile.
Deeper pocket rail; available at select locations.
Two grooves create the look of three 4″ pickets in one board.
A smooth, solid tongue-and-groove face.
Smooth: White, Tan, Clay, Ash Gray.
Woodgrain: Green Teak, Chai Gray, Aspen Latte, Mocha Walnut.
8 ft. wide panels require a bottom-rail insert. 8 ft. tall fencing gets a mid rail. Match rails, pickets, routed posts and caps as a complete system.
Make an
entrance.
Assembled gates, coordinated with the fence.

2 × 3.5-inch vinyl gate uprights with outside low-profile caps. Metal frame aligned to the top and bottom rails.
A vinyl frame and block construction option.
A galvanized steel frame option for the gate assembly.
An aluminum frame option for the gate assembly.
Include gate openings in the layout. Confirm frame, infill, hinges, latch, post reinforcement and wheel selection in the material quote.

2 rails.
An open horizon.
2 Rail
2 broad horizontal rails give the property line a clear rhythm while keeping the landscape in view. Coordinate the routed vinyl posts, rail count and chosen finish.

Make it yours.

















- Exactly 2 horizontal rails per bay
- 5.5-inch-tall rails / 5-inch-wide posts
- Top rail 2 inches below post top; 10.5-inch clear gaps, including ground clearance
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Routed 5 × 5 posts
Use line, end and corner routing matched to this panel.

5.5-inch-tall rails
Use 2 rail routing and matched rail lengths. The rail face is wider than the 5-inch post.

Matching post caps
Pyramid, Gothic or New England in the selected vinyl color.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
2 × 3.5-inch gate uprights with outside low-profile caps. Metal-frame members align with the gate rails.
Available on every vinyl style. Coordinate galvanized steel or aluminum framing with the selected gate.
Carry the 2 rail profile and selected vinyl finish into the gate design.
Select compatible hinges, latch, post reinforcement and an optional wheel for the opening.

3 rails.
An open horizon.
3 Rail
3 broad horizontal rails give the property line a clear rhythm while keeping the landscape in view. Coordinate the routed vinyl posts, rail count and chosen finish.

Make it yours.













- Exactly 3 horizontal rails per bay
- 5.5-inch-tall rails / 5-inch-wide posts
- Top rail 2 inches below post top; 10.5-inch clear gaps, including ground clearance
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Routed 5 × 5 posts
Use line, end and corner routing matched to this panel.

5.5-inch-tall rails
Use 3 rail routing and matched rail lengths. The rail face is wider than the 5-inch post.

Matching post caps
Pyramid, Gothic or New England in the selected vinyl color.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
2 × 3.5-inch gate uprights with outside low-profile caps. Metal-frame members align with the gate rails.
Available on every vinyl style. Coordinate galvanized steel or aluminum framing with the selected gate.
Carry the 3 rail profile and selected vinyl finish into the gate design.
Select compatible hinges, latch, post reinforcement and an optional wheel for the opening.

4 rails.
An open horizon.
4 Rail
4 broad horizontal rails give the property line a clear rhythm while keeping the landscape in view. Coordinate the routed vinyl posts, rail count and chosen finish.

Make it yours.













- Exactly 4 horizontal rails per bay
- 5.5-inch-tall rails / 5-inch-wide posts
- Top rail 2 inches below post top; 9.5-inch clear gaps, including ground clearance
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Routed 5 × 5 posts
Use line, end and corner routing matched to this panel.

5.5-inch-tall rails
Use 4 rail routing and matched rail lengths. The rail face is wider than the 5-inch post.

Matching post caps
Pyramid, Gothic or New England in the selected vinyl color.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
2 × 3.5-inch gate uprights with outside low-profile caps. Metal-frame members align with the gate rails.
Available on every vinyl style. Coordinate galvanized steel or aluminum framing with the selected gate.
Carry the 4 rail profile and selected vinyl finish into the gate design.
Select compatible hinges, latch, post reinforcement and an optional wheel for the opening.

Privacy.
With a lighter top.
Privacy with Lattice
An open diamond lattice accent adds detail above the solid lower panel. It brings a decorative top line to a defined garden boundary.

Make it yours.













- Solid base with diamond lattice
- 6, 7 or 8 ft nominal width choices
- Coordinate the midrail and lattice package
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Routed 5 × 5 posts
Use line, end and corner routing matched to this panel.

Pocket top and bottom rails
1.5 × 5.5-inch profile; 8-inch profile where available. Match the supplied panel.

Tongue-and-groove pickets
11.3-inch or 6-inch profiles where available. Interlock each edge.

Continuous U-channel
Captures the first and last privacy-picket edges at the posts.

Lattice and middle rail
Decorative lattice above the solid privacy infill; matching three-rail gate construction.

Matching post caps
Pyramid, Gothic or New England in the selected vinyl color.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

2 × 3.5-inch gate uprights with outside low-profile caps. Metal-frame members align with the gate rails.
Available on every vinyl style. Coordinate galvanized steel or aluminum framing with the selected gate.
Carry the privacy with lattice profile and selected vinyl finish into the gate design.
Select compatible hinges, latch, post reinforcement and an optional wheel for the opening.

A welcoming
first impression.
Picket
Straight pointed pickets keep the front garden open while giving it a familiar, finished edge. The profile uses 5×5-inch posts, 3-inch pickets and 2.75-inch clear gaps between pickets. Each picket passes through the rails and has its own fitted cap below the post-cap height.

Make it yours.
- Uniform pointed picket tops
- 36, 42, 48 or 60 in height choices
- 5×5-inch posts / 3-inch pickets / 2.75-inch clear gaps between pickets
16 × 3-inch pickets and 17 × 2¾-inch clear gaps, including both post-to-picket gaps, span 94¾ inches between posts.
Pickets pass through the rails and have individual caps. The capped picket tops finish below the post-cap height.
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Routed 5 × 5 posts
Use line, end and corner routing matched to this panel.
Routed top and bottom rails
2 × 3.5-inch picket rails. Align the picket openings before assembly.
3-inch pickets
2¾-inch clear gaps, including the end gaps. Pickets pass through the rails and receive pointed caps.

Matching post caps
Pyramid, Gothic or New England in the selected vinyl color.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

2 × 3.5-inch gate uprights with outside low-profile caps. Metal-frame members align with the gate rails.
Available on every vinyl style. Coordinate galvanized steel or aluminum framing with the selected gate.
Carry the picket profile and selected vinyl finish into the gate design.
Select compatible hinges, latch, post reinforcement and an optional wheel for the opening.

A softer
garden line.
Scalloped Picket
A concave sweep through each bay adds movement to the picket profile. The pickets rise toward the posts and fall at the center. The profile uses 5×5-inch posts, 3-inch pickets and 2.75-inch clear gaps between pickets. Each picket passes through the rails and has its own fitted cap below the post-cap height.

Make it yours.
- Concave scalloped top
- 36, 42, 48 or 60 in height choices
- 5×5-inch posts / 3-inch pickets / 2.75-inch clear gaps between pickets
16 × 3-inch pickets and 17 × 2¾-inch clear gaps, including both post-to-picket gaps, span 94¾ inches between posts.
Pickets pass through the rails and have individual caps. The capped picket tops finish below the post-cap height.
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Routed 5 × 5 posts
Use line, end and corner routing matched to this panel.
Routed top and bottom rails
2 × 3.5-inch picket rails. Align the picket openings before assembly.
3-inch pickets
2¾-inch clear gaps, including the end gaps. Pickets pass through the rails and receive pointed caps.

Matching post caps
Pyramid, Gothic or New England in the selected vinyl color.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

2 × 3.5-inch gate uprights with outside low-profile caps. Metal-frame members align with the gate rails.
Available on every vinyl style. Coordinate galvanized steel or aluminum framing with the selected gate.
Carry the scalloped picket profile and selected vinyl finish into the gate design.
Select compatible hinges, latch, post reinforcement and an optional wheel for the opening.

An open view.
A defined space.
Pool
A continuous top rail and open vertical pickets create a clean enclosure profile. Plan the fence, gate and hardware together for the project.

Make it yours.













- Flat continuous top rail
- 48 or 60 in height choices
- 6 or 8 ft nominal widths
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Routed 5 × 5 posts
Use line, end and corner routing matched to this panel.
Routed top and bottom rails
2 × 3.5-inch picket rails. Align the picket openings before assembly.
3-inch pickets
2¾-inch clear gaps, including the end gaps. Pool-style pickets are contained between the rails.

Matching post caps
Pyramid, Gothic or New England in the selected vinyl color.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Available on every vinyl style. Coordinate galvanized steel or aluminum framing with the selected gate.
Carry the pool profile and selected vinyl finish into the gate design.
Select compatible hinges, latch, post reinforcement and an optional wheel for the opening.

Clean lines.
Your materials.
Modern Fence
Powder-coated aluminum posts and rails create a clean, grooved-post system. Choose horizontal or vertical aluminum pickets, or one of five infill materials.

Frame the
material.
Aluminum with Fill
Powder-coated aluminum posts and rails frame your chosen infill. Grooved posts receive the system components. Explore Vinyl, Composite Wood Grain, Composite Sanded, Shadow or Cedar.

Make it yours.

Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Grooved aluminum post
Built-in channels receive the panel components.

Selected infill
Match the picket orientation, material and finish selected for this panel.

Retaining bracket
Supports the bottom component and secures the top of the assembled panel.

Metal U-channel
Receiver for corners and gate-post connections.

Gap filler
Closes the unused post channels.

Post cap
Finish the post after the assembly is secured.

Rail bracket
Use the rail connection for the selected pocket-rail or panel configuration.

Top and bottom pocket rails
Open channels capture the selected infill.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Match the material-specific infill, aluminum frame and finish.
Use gate uprights, end caps and compatible fastening components.
Hinges, latch and handle; drop rod and wheel where selected for the gate configuration.
Vinyl
Powder-coated aluminum frame. Material-specific infill and color choices.







Horizontal and supported vertical configurations depend on the material and system. Confirm the selected orientation, components and finish in the calculator.
Composite Wood Grain
Powder-coated aluminum frame. Material-specific infill and color choices.





Horizontal and supported vertical configurations depend on the material and system. Confirm the selected orientation, components and finish in the calculator.
Composite Sanded
Powder-coated aluminum frame. Material-specific infill and color choices.





Horizontal and supported vertical configurations depend on the material and system. Confirm the selected orientation, components and finish in the calculator.
Shadow
Powder-coated aluminum frame. Material-specific infill and color choices.






Horizontal and supported vertical configurations depend on the material and system. Confirm the selected orientation, components and finish in the calculator.
Cedar
Powder-coated aluminum frame. Material-specific infill and color choices.


Horizontal and supported vertical configurations depend on the material and system. Confirm the selected orientation, components and finish in the calculator.
A coordinated
combination.
Match the infill material, orientation and color to the selected system.
Additional system palette: Black, Gray, White, Wood.
Additional system palette: White, Tan, Clay.
Additional system palette: White, Tan.
These additional palettes belong to different component combinations. They do not expand every material palette shown alongside. Current stock and your final quoted configuration determine the orderable combination.


A distinctly
horizontal line.
Horizontal Aluminum
Powder-coated aluminum posts, rails and pickets form a grooved-post system. Picket spacers establish the selected gap between horizontal aluminum pickets.

Make it yours.


- Privacy, Semi Privacy or Mixed
- Powder-coated aluminum posts, rails and pickets
- Grooved posts / picket spacers set the gap
Picket spacers set the standard ½″, 1″ or 1⅜″ gaps. Privacy, Semi Privacy and Mixed profiles are shown in the next spread.
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Grooved aluminum post
Built-in channels receive the panel components.

Horizontal picket
Match the picket orientation, material and finish selected for this panel.

Retaining bracket
Supports the bottom component and secures the top of the assembled panel.

Metal U-channel
Receiver for corners and gate-post connections.

Gap filler
Closes the unused post channels.

Post cap
Finish the post after the assembly is secured.

Rail bracket
Use the rail connection for the selected pocket-rail or panel configuration.

Picket spacer
Sets the selected ½-inch, 1-inch or 1⅜-inch standard gap.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Match the horizontal aluminum pickets, aluminum frame and finish.
Use gate uprights, end caps and compatible fastening components.
Hinges, latch and handle; drop rod and wheel where selected for the gate configuration.
Three ways
to draw the line.
Privacy, Semi Privacy or Mixed. Choose the rhythm that suits your space.
A closed horizontal aluminum profile.
Spaced aluminum pickets create an open rhythm.
A combination of rail and picket profiles.
½″ · 1″ · 1⅜″
Powder-coated aluminum posts, rails and pickets. Grooved posts and picket spacers set the selected gap. Mixed systems use their own rail and spacer arrangement; confirm in the calculator.




Change the
direction.
Vertical Aluminum
Powder-coated aluminum posts, rails and pickets form a grooved-post system. Picket spacers establish the selected gap between vertical aluminum pickets.

Make it yours.


- Broad vertical aluminum pickets
- Powder-coated aluminum posts, rails and pickets
- Grooved posts / picket spacers set the gap
Grooved posts receive the rails and aluminum pickets. Picket spacers produce the selected gap; confirm the buildable configuration in the calculator.
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Grooved aluminum post
Built-in channels receive the panel components.

Vertical picket
Match the picket orientation, material and finish selected for this panel.

Retaining bracket
Supports the bottom component and secures the top of the assembled panel.

Metal U-channel
Receiver for corners and gate-post connections.

Gap filler
Closes the unused post channels.

Post cap
Finish the post after the assembly is secured.

Rail bracket
Use the rail connection for the selected pocket-rail or panel configuration.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Match the vertical aluminum pickets, aluminum frame and finish.
Use gate uprights, end caps and compatible fastening components.
Hinges, latch and handle; drop rod and wheel where selected for the gate configuration.

Define the
perimeter.
Chain Link Fence
Choose the fabric finish and framework first. Add privacy slats or security features to suit the location and purpose.

A practical
open boundary.
Galvanized
Silver galvanized fabric and framework create a clear perimeter while keeping the landscape visible.

Make it yours.


- Galvanized fabric finish
- Choose height, mesh, gauge and selvage
- Match posts, top rail, tensioning and gates
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Pipe posts
Match the supplied galvanized system, size and finish.

Swedged top rail
Match the supplied galvanized system, size and finish.

Chain-link fabric
Match the supplied galvanized system, size and finish.

Tension bar
Match the supplied galvanized system, size and finish.

Bands
Match the supplied galvanized system, size and finish.

Line cap
Match the supplied galvanized system, size and finish.

Terminal cap
Match the supplied galvanized system, size and finish.

Rail end
Match the supplied galvanized system, size and finish.

Tie wire
Match the supplied galvanized system, size and finish.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Swing, roller or cantilever gate configurations are selected for the opening.
Match fabric and finish.
Hinges and latch for swing gates; rollers, tracks or guides matched to the selected sliding system.

Choose the
level of screening.
Privacy Slatted
Privacy slats add a screened surface to the chain-link system. Fence finish and slat color are separate choices.

Make it yours.




- Separate slats or pre-slatted roll options
- Choose framework color separately
- Slat colors vary by height, type and location
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Pipe posts
Match the supplied privacy slatted system, size and finish.

Swedged top rail
Match the supplied privacy slatted system, size and finish.

Chain-link fabric
Match the supplied privacy slatted system, size and finish.

Tension bar
Match the supplied privacy slatted system, size and finish.

Bands
Match the supplied privacy slatted system, size and finish.

Line cap
Match the supplied privacy slatted system, size and finish.

Terminal cap
Match the supplied privacy slatted system, size and finish.

Rail end
Match the supplied privacy slatted system, size and finish.

Tie wire
Match the supplied privacy slatted system, size and finish.

Privacy slats
Match the supplied privacy slatted system, size and finish.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Swing, roller or cantilever gate configurations are selected for the opening.
Match privacy slats and fabric.
Hinges and latch for swing gates; rollers, tracks or guides matched to the selected sliding system.

A perimeter
with purpose.
Security
Extended posts and security strands add a separate upper zone to the chain-link perimeter. The complete configuration is specified for the project.

Make it yours.




- Straight extended-post profile shown
- Galvanized security configuration shown
- Confirm height, strands, access and local requirements
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Pipe posts
Match the supplied security system, size and finish.

Swedged top rail
Match the supplied security system, size and finish.

Chain-link fabric
Match the supplied security system, size and finish.

Tension bar
Match the supplied security system, size and finish.

Bands
Match the supplied security system, size and finish.

Line cap
Match the supplied security system, size and finish.

Terminal cap
Match the supplied security system, size and finish.

Rail end
Match the supplied security system, size and finish.

Tie wire
Match the supplied security system, size and finish.

Extension arms
Match the supplied security system, size and finish.

Security wire
Match the supplied security system, size and finish.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Swing, roller or cantilever gate configurations are selected for the opening.
Match security fabric and top treatment.
Hinges and latch for swing gates; rollers, tracks or guides matched to the selected sliding system.

A darker line.
An open view.
Vinyl Coated
A coated finish changes the visual character of chain link. Match the fabric, framework and fittings as a coordinated system.

Make it yours.



- Black or Green coating choices
- Select the fabric profile and height
- Coordinate matching framework and fittings
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Pipe posts
Match the supplied vinyl coated system, size and finish.

Swedged top rail
Match the supplied vinyl coated system, size and finish.

Chain-link fabric
Match the supplied vinyl coated system, size and finish.

Tension bar
Match the supplied vinyl coated system, size and finish.

Bands
Match the supplied vinyl coated system, size and finish.

Line cap
Match the supplied vinyl coated system, size and finish.

Terminal cap
Match the supplied vinyl coated system, size and finish.

Rail end
Match the supplied vinyl coated system, size and finish.

Tie wire
Match the supplied vinyl coated system, size and finish.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Swing, roller or cantilever gate configurations are selected for the opening.
Match fabric and finish.
Hinges and latch for swing gates; rollers, tracks or guides matched to the selected sliding system.

An open view.
A strong line.
Ornamental Fence
Slender pickets frame the landscape. Choose from four top profiles, 2- or 3-rail options and a Black finish.

Keep the
top line clean.
Smooth Top
A continuous upper rail gives this ornamental profile a quiet, linear finish. The landscape remains visible between the slender pickets. Choose 2- or 3-rail construction in Black.

Make it yours.


- Smooth continuous top rail
- 2-rail or 3-rail options
- Black finish
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Ornamental panel
Match the supplied smooth top system, size and finish.

Matching post
Match the supplied smooth top system, size and finish.

Panel brackets
Match the supplied smooth top system, size and finish.

Post cap
Match the supplied smooth top system, size and finish.

Fasteners
Match the supplied smooth top system, size and finish.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Smooth Top gate profile in Black.
Coordinate the gate width, frame and post support.
Compatible hinges, latch and handle; drop rods or guides where required by the selected gate.

A sharper
architectural edge.
Point Top
Pressed picket points project above the upper rail to create a more pronounced ornamental top line. Choose 2- or 3-rail construction in Black.

Make it yours.


- Pressed pointed picket ends
- 2-rail or 3-rail options
- Black finish
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Ornamental panel
Match the supplied point top system, size and finish.

Matching post
Match the supplied point top system, size and finish.

Panel brackets
Match the supplied point top system, size and finish.

Post cap
Match the supplied point top system, size and finish.

Fasteners
Match the supplied point top system, size and finish.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Point Top gate profile in Black.
Coordinate the gate width, frame and post support.
Compatible hinges, latch and handle; drop rods or guides where required by the selected gate.

Simple ends.
A strong rhythm.
Square Top
Straight square-ended pickets project above the upper rail for a restrained ornamental profile. Choose 2- or 3-rail construction in Black.

Make it yours.


- Flat square-ended pickets
- 2-rail or 3-rail options
- Black finish
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Ornamental panel
Match the supplied square top system, size and finish.

Matching post
Match the supplied square top system, size and finish.

Panel brackets
Match the supplied square top system, size and finish.

Post cap
Match the supplied square top system, size and finish.

Fasteners
Match the supplied square top system, size and finish.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Square Top gate profile in Black.
Coordinate the gate width, frame and post support.
Compatible hinges, latch and handle; drop rods or guides where required by the selected gate.

A curve at
the top line.
Curved Top
The upper ends turn in a consistent direction, bringing a distinct silhouette to this open ornamental profile. Choose 2- or 3-rail construction in Black.

Make it yours.


- Curved picket ends
- 2-rail or 3-rail options
- Black finish
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Ornamental panel
Match the supplied curved top system, size and finish.

Matching post
Match the supplied curved top system, size and finish.

Panel brackets
Match the supplied curved top system, size and finish.

Post cap
Match the supplied curved top system, size and finish.

Fasteners
Match the supplied curved top system, size and finish.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.

Curved Top gate profile in Black.
Coordinate the gate width, frame and post support.
Compatible hinges, latch and handle; drop rods or guides where required by the selected gate.

Texture with
presence.
SimTek Fence
Stone-look and wood-grain molded panels create a solid backdrop with a distinct surface and a coordinated post system.

Stone
character.
Eco Stone
A molded stone-look surface gives the boundary depth and texture. The panel remains part of a coordinated post-and-panel system.

Make it yours.






- Molded stone relief
- 3, 4, 6 or 8 ft height choices
- 5 Granite finish choices
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Pre-channeled line post
Metal-core post with channels on opposite sides for a straight run.

Pre-channeled end post
Metal-core post with a channel for the end of the run.

Pre-channeled corner post
Metal-core post with channels on adjacent sides to turn a corner.

EcoStone panel
2-inch-thick molded panel with stone relief.

Bottom panel bracket
Included with the post. Screw the bracket into the post channel; the panel rests on top of it.

Post cap
Finishes the top of the installed post.

Bottom panel insert
Slides into the opening at the bottom of the panel. An additional insert can be purchased for the top.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
Match the stone-look finish and selected opening.
Gate posts and reinforcement are selected with the frame and span.
Coordinate the hardware, swing clearance and final opening dimensions.

Grain.
Depth. Privacy.
Eco Wood
Vertical wood-grain relief creates a textured privacy backdrop with matching molded-system posts and caps.

Make it yours.





- Molded vertical wood-grain texture
- 4, 6 or 8 ft height choices
- Four wood-grain finishes
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Pre-channeled line post
Metal-core post with channels on opposite sides for a straight run.

Pre-channeled end post
Metal-core post with a channel for the end of the run.

Pre-channeled corner post
Metal-core post with channels on adjacent sides to turn a corner.

EcoWood panel
Molded wood-grain panel. Match the size and texture on your order.

Bottom panel bracket
Included with the post. Screw the bracket into the post channel; the panel rests on top of it.

Post cap
Finishes the top of the installed post.

Bottom panel insert
Slides into the opening at the bottom of the panel. An additional insert can be purchased for the top.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
Match the wood-grain finish and selected opening.
Gate posts and reinforcement are selected with the frame and span.
Coordinate the hardware, swing clearance and final opening dimensions.

Composite.
Two directions.
Trex Fence
Seclusions creates vertical privacy. Horizons turns the infill horizontal. Both have their own frame and component arrangement.

Composite
in the vertical.
Seclusions
Vertical interlocking composite pickets give Seclusions its continuous privacy surface and defined top line.

Make it yours.




- Vertical composite pickets
- Saddle, Winchester Gray or Woodland Brown
- System-specific rails, posts and caps
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Composite panel / infill
Use Seclusions orientation and the selected composite finish.

Composite posts
Line, corner, end and gate positions follow your layout.

Post caps
Match the cap and composite finish.

Post reinforcement
Use the specified stiffener at gate and reinforced post positions.

Composite top rail
Match the Seclusions top-rail profile and finish.

Bottom rail insert
Aluminum insert supports the bottom-rail assembly.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
Carry the Seclusions orientation and finish into the gate.
Coordinate the gate construction, reinforcement and opening width.
Select compatible hinges and latch; confirm swing and ground clearance.

A horizontal
perspective.
Horizons
Horizontal composite infill establishes a broad, layered rhythm. Horizons uses its own rail and frame arrangement.

Make it yours.




- Horizontal composite infill
- Saddle, Winchester Gray or Woodland Brown
- Coordinate Horizons-specific frame components
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

Composite panel / infill
Use Horizons orientation and the selected composite finish.

Composite posts
Line, corner, end and gate positions follow your layout.

Post caps
Match the cap and composite finish.

Post reinforcement
Use the specified stiffener at gate and reinforced post positions.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
Carry the Horizons orientation and finish into the gate.
Coordinate the gate construction, reinforcement and opening width.
Select compatible hinges and latch; confirm swing and ground clearance.

Country lines.
Steel structure.

2 rails.
An open horizon.
2 Rail
2 broad powder-coated steel rails define the property line. Each rail is 8 feet long. A composite post lock slides inside the steel post and locks the rails in place.

Make it yours.



- Exactly 2 horizontal rails per bay
- 5.5-inch-tall rails / 5-inch-wide posts
- Top rail 2 inches below post top; 10.5-inch clear gaps, including ground clearance
Powder-coated steel posts and 8 ft. rails. The internal composite post lock slides inside the post and secures the rails.
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

5 × 5 steel posts
Use the 2 rail post configuration for line, end and corner positions.

Steel ranch rails
5.5-inch rail face. Nominal 8-foot rail length.

Internal rail-lock insert
Composite insert slides inside the steel post and locks the rails in place.

Post cap
Matching powder-coated cap for the 5 × 5 post.

Rail-opening grommet
Matches the 1.5 × 5.5-inch rail opening.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
Match the 2 rail style and powder-coated finish.
Select the opening width and frame with the supporting posts.
Coordinate hinges, latch, clearance and any selected support wheel.

3 rails.
An open horizon.
3 Rail
3 broad powder-coated steel rails define the property line. Each rail is 8 feet long. A composite post lock slides inside the steel post and locks the rails in place.

Make it yours.



- Exactly 3 horizontal rails per bay
- 5.5-inch-tall rails / 5-inch-wide posts
- Top rail 2 inches below post top; 10.5-inch clear gaps, including ground clearance
Powder-coated steel posts and 8 ft. rails. The internal composite post lock slides inside the post and secures the rails.
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

5 × 5 steel posts
Use the 3 rail post configuration for line, end and corner positions.

Steel ranch rails
5.5-inch rail face. Nominal 8-foot rail length.

Internal rail-lock insert
Composite insert slides inside the steel post and locks the rails in place.

Post cap
Matching powder-coated cap for the 5 × 5 post.

Rail-opening grommet
Matches the 1.5 × 5.5-inch rail opening.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
Match the 3 rail style and powder-coated finish.
Select the opening width and frame with the supporting posts.
Coordinate hinges, latch, clearance and any selected support wheel.

4 rails.
An open horizon.
4 Rail
4 broad powder-coated steel rails define the property line. Each rail is 8 feet long. A composite post lock slides inside the steel post and locks the rails in place.

Make it yours.



- Exactly 4 horizontal rails per bay
- 5.5-inch-tall rails / 5-inch-wide posts
- Top rail 2 inches below post top; 9.5-inch clear gaps, including ground clearance
Powder-coated steel posts and 8 ft. rails. The internal composite post lock slides inside the post and secures the rails.
Options vary by system and supply location. Confirm your complete configuration in the quote. Digital previews do not replace physical finish samples.
Built from
the right parts.
The components for this fence system.

5 × 5 steel posts
Use the 4 rail post configuration for line, end and corner positions.

Steel ranch rails
5.5-inch rail face. Nominal 8-foot rail length.

Internal rail-lock insert
Composite insert slides inside the steel post and locks the rails in place.

Post cap
Matching powder-coated cap for the 5 × 5 post.

Rail-opening grommet
Matches the 1.5 × 5.5-inch rail opening.
Match the complete system, dimensions and finish in your material quote.
Make an
entrance.
Bring the fence style into the gate.
Match the 4 rail style and powder-coated finish.
Select the opening width and frame with the supporting posts.
Coordinate hinges, latch, clearance and any selected support wheel.
Start with
your space.
A few clear measurements make a better materials quote.
Plan your project
Choose the fence family, style, height and finish. Record the project location and access constraints.
Draw the layout
Mark runs, corners, changes in grade and gate openings. Keep gate-opening measurements separate.
Calculate the materials
Choose your supply location, then configure the available materials, finishes and dimensions.
A complete
materials package.
Turn your layout and finish selections into a coordinated order.
Configure the complete system
Send the job location, family, style, finish, dimensions and gate layout. Coordinate panels or rails, posts, caps, reinforcement and compatible hardware.
Confirm fulfillment
Review the materials list, supply location, delivery or pickup arrangements in the quote and order confirmation.
Manufacturer warranty
Product warranties are provided by the manufacturer. Wholesale Fencing helps identify the applicable warranty and assists customers with the claim process for their situation.
Help with a concern
Keep your invoice, product details, photos and a description of the issue. Coverage and remedies depend on the applicable manufacturer warranty.


































